This advanced fully automatic three-stage 50 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries. “Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries. The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.

Our Part # SMX-SEC-1250UL | Samlex America Part # SEC-1250UL

• Switch mode technology for high efficiency, lightweight and quiet operation.
• Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell.
• Can charge 2 banks of batteries simultaneously, no isolator necessary.
• Can be used as a power supply or DC UPS when used in conjunction with a battery.
• User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz.
• User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries.
• “Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries.
• Voltmeter and Ammeter for monitoring.
• Fan cooled based on output current.
• Protections: Short circuit, overload, reverse battery connection and over temperature.
• Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively.
• Intertek-ETL listed: Conforms to ANSI/UL Standard 1564 ; Certified to CAN/CSA STD. C22.2 No. 107.2.