We at Mauri Pro Sailing carry the top Bow Rollers from
Garhaur and Lewmar. Bow rollers from both brands will assist with providing
a low friction surface for you to store and drop anchor while avoiding
damage to the deck or tops of your boat. In addition to protecting your boat, Bow rollers allow you to deploy your anchor at short notice, allowing you to visit more anchorages and explore more locations with your boat. They also provide a fair lead for anchor rode, preventing excessive wear and tear on the line and the boat. When installing a Bow roller on a sailboat, it is important to consider the location of the forestay, furler, pulpit and bowsprits.
When combined with a windlass, an anclhor roller allows you to drop anchor without having to up up to the front of the boat, increasing your comfort and safety. These rollers fit the most combinations
of flukes and mounting styles. Technical assistance is provided to fit
you with the right bow roller to help you flawlessly drop anchor at a
moments notice. When installing an anchor roller to accompany a windlass, be sure that the anchor roller is aligned with the gypsy.
About Garhauer Bow Rollers
Garhaur manufacturers three sizes of anchor rollers to accomadate a wide range of anchor sizes. The smallest size, the model AR-30 has a overall length of 24". The Larger sizes of Gaurhaur anchor roller has an overall length of 30". The difference between them is their width, the AR-35 has a width of 3" while the AR-40's widt is 4". All Garhuer anchor rollers are constructed in California using stainless steel and have a 10 year warrenty.
About Lewmar Bow Rollers
Lewmar Anchor Rollers have a friction free surfuce that is achieved by having a rolling surface at the front and back of the fluke. This makes dropping and weighing the anchor much easier. Lewmar anchor rollers are made to work perfectly with Lewmar anchors, althought they can also be used with similar anchors. Lewmar makes and anchor roller that is for all fluke style anchors up to 35 lbs. For Delta anchors up to 35 lbs, there are two different anchor rollers that can be used, a long and short version. All Lewmar Anchor rollers are constructed from shiny stainless steel,providing good looks and functionality.
The Lewmar Pivoting fluke style bow roller has an overall length of 20 inches. The Lewmar Delta bow roller is available in a 20 inch and a 23 inch overall length. For full dimensions, see the charts at the bottom of the individual product pages.
We atÂ Mauri Pro SailingÂ are fully committed to be yourÂ Bow RollerÂ specialist not only providing the sailing community with a comprehensive and easy to use web site but with all the appropriate technical information that you might need to select your sailboat hardware and equipment. If you need any assistance selecting the appropriateÂ Anchor Rollers Â for your sailboat pleaseÂ contact us. Our crew is ready to help!