Harken MKIV Ocean Installation

Installation:
1. Headstay removal and replacement:

• Remove the existing headstay while safely securing the mast.
• Install the new headstay with the appropriate length and termination.

2. Furler assembly:

• Assemble the furler unit following the manual's step-by-step instructions, including attaching the foils, halyard swivel, drum assembly, and other components.

3. Rigging:

• Install the turnbuckle and toggle, connecting the headstay to the furler.
• Adjust the headstay tension, it needs to be straight as an arrow.
• Attach the furling line and feeder as per the manual's instructions.
• Install the halyard and ensure proper routing and tension.

4. Commissioning:

• Follow the manual's guidance on furler adjustments and initial operation checks.
• Feed the sail through the foils and connect the tack to the tack swivel.
• Wind up the drum in order to prepare the system.
• Test the furling system ensuring smooth operation and proper sail furling/unfurling.

5. Final adjustments and checks:

• Make any necessary adjustments to the turnbuckle, furling line tension, and halyard.
• Thoroughly inspect the entire system for proper installation and secure connections.