FREE SHIPPING! for US Continental orders over $99
click for details
Hatches & Portlights
How To Identify Your Hatch?
Click here now to download our easy Hatch Identification Manual.
Flush Hatch
Lewmar pioneered the high volume flush hatch platform back in 2006, bringing what was then superyacht studying into mainstream boat production. The precision of the fit makes for a sleek, modern look and means no more stubbed toes for boat owners.
SHOP FLUSH HATCHES FLUSH SPECIFICATIONS
Low Profile Hatch
Best mid range hatch in the business.
The Low Profile Hatch has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as a foredeck hatches on smaller to midsize yachts.
SHOP LOW PROFILE HATCHES LOW PROFILE SPECIFICATIONS
Vetus Altus Hatch
Best mid range hatch in the business.
ALTUS is made of sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of ⅜” (10 mm) and is “dark mode” colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90 degrees. Type ALTUS can be fitted on deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight.
SHOP ALTUS HATCHES ALTUS SPECIFICATIONS
Vetus PZ Type Portlight
Type PZ (AI)
Heavy-duty portholes.
These portholes are suitable for use on the hull side. The 3/8" (10 mm) “smoke” colored opening pane is set in a satin anodized aluminum frame. Black or white powder-coated frames are optional. The clamp fixing ensures that no fasteners are visible from either inside or outside. The portholes can be held open in any position due to the friction type hinges. In the closed position, knobs ensure complete water tightness. The porthole can be fitted in a surface with a minimum thickness of 1/16” (2 mm) and a maximum thickness of 11/16” (18 mm). As standard, a mosquito screen is supplied.
Type PZ (AIII)
Medium duty portholes.
These portholes are suitable for use in the coachroof side. They come with a 10mm “smoke” colored, unframed opening pane. The clamp-type installation ensures that no fasteners are visible from either inside or outside. The portholes can be held open in any position due to the friction type hinges. In the closed position, 2 knobs ensure complete water tightness. The porthole can be fitted in a surface with a minimum thickness of 1/16” (2 mm) and a maximum thickness of 11/16” (18 mm).
SHOP TYPE PZ HATCHES TYPE PZ SPECIFICATIONS
Beckson Self Drain Portlight
An innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows where an angled spigot extends below the bolt holes. The internal angle seats tightly against the gasket and lends, thus omitting an exterior water retention ledge present in most other ports. (No water-fall when you open the port after a rain).
| Port Size | Inside Frame | Outside Frame | Lens OD | Screen OD |
|---|---|---|---|---|
| 410 | 4-1/2" x 10-1/2" | 5-1/2" x 12-3/8" | 4-5/8" x 10-7/8" | 4-3/16" x 10-7/16" |
| 11.4 cm x 26.7 cm | 17.1 cm x 32.4 cm | 10.2 cm x 27.6 cm | 10.6 cm x 26.5 cm |
Quick Maintenance Guide
- Clean the anodized or powder-coated aluminum profiles regularly; 2 to 4 times a year, depending on how dirty they get.
- Use only neutral cleaning agents. Do NOT use alkaline, acid and/or abrasive cleaners.
- After cleaning, apply a thin coat of transparent wax for protection.
- Protect the sealing rubbers with talcum powder.
SHOP HATCHES & PORTLIGHTS HERE AT MAURIPRO SAILING!
Don't forget to subscribe to our social media channels!
/MauriProSailing
@mauripro.sailing
@_MAURIPRO
/mauri-pro-sailing-llc
MAURIPRO