Harken Battcar System CHarken

Harken C Battcar System
A Harken C Battcar System along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded. Battcar systems outperform in-mast or in-boom furling, cost less, and you don’t need to recut your sail.

The one-piece solid aluminum construction is lightweight and strong. Cars and headboard plates are deep-saturation Hard Lube anodized and PTFE impregnated for durability. UV stabalized with black additive for maximum protection. 

CB Batten Cars let you hoist and reef the main quickly on all points of saill. Stainless steel wire guides keep the balls captive when the car is off the track.

Web-On Headboard Plates are easy for sailmakers to install. Plates have radiused edges to protect the sail and fit 1 in (25mm) webbing strap. Holes threaded into plates accept 416 cheek blocks for leech line. Web-on plates are required for the 3867 System B CB headboard car.

The Harken Battcar System C CB Cars and Web-On Headboard Plates one-piece solid aluminum construction is lightweight and strong. Cars and headboard plates are Hard Lube anodized for durability. UV stabilized with black additive for maximum protection. 

CB Cars
The free-rolling ball bearing cars let you hoist and reef the main quickly on all points of sail. The quick-release button lets you easily load and remove the mainsail. Stainless steel wire guides keep the balls captive when the car is off the track.

Web-On Headboard Plates

Aluminum web-on headboard plates are easy for sailmakers to install. Plates have radiused edges to protect the sail and fit 1 in (25 mm) webbing strap. Holes threaded into plates accept 416 cheek blocks for leech line. Web-on plates are required for the 3867 System C CB headboard car. Sold separately. 

Typical Boat Size:

Monohulls: length 60 - 90 ft (18.3 - 27 m)
mainsail area under 1940 ft2 (180 m2)

Multihulls: length 50 - 70 ft (15.2 - 21 m)
mainsail area under 1510 ft2 (140 m2 )

The one-piece solid aluminum construction is lightweight and strong. Cars and headboard plates are Hard Lube anodized for durability. UV stabilized with black additive for maximum protection. 

Harken Battcar System C Track is extruded from high-grade 6061-T6 aluminum and hardcoatanodized for a hard, long-lasting surface. 3853 track mounts to mast using a unique slug system that allows mast-up installation.

For masts without internal sail track, attach R32 Big Boat traveler track by drilling and tapping the spar. Join track sections with splice links. Order one per track section. Order one low-beam endstop (sold in pairs). See chart below.

Use flanged track when mounting to carbon spars. Track features a groove for racing sails with boltropes or slugs.

The one-piece solid aluminum construction is lightweight and strong. Cars and headboard plates are Hard Lube anodized for durability. UV stabilized with black additive for maximum protection. 

Harken Battcar System C Mounting Kit slugs are available for flat mast grooves. Order one kit per track section. Use pinstop endstop to easily remove cars and mainsail. Order one kit only.



System C<br>CB Batten Cars
System C<br>Battcar Track
System C<br>Battcar Kits
   

PayPal © Site content copyright Mauri Pro Sailing, LLC. All rights reserved
Site developed by Mauri Pro Sailing
Mauri Logo