for US Continental orders over $99
|Height (H)||157 mm|
|base (D)||153 mm|
|drum (d)||80 mm|
|Recovery (manual use) 1||125 mm|
|Recovery (manual use) 2||40 mm|
|min line||6 mm|
|max line||12 mm|
|Fixing screws||5 x 8 mm|
|Gear ratio 1||2 : 1|
|Gear ratio 2||6.4 : 1|
XT ST cruise winch, power 40, 2 speed, chromed drum14 new self-tailing winches available in the following versions: Hard black aluminium (AL): the aluminium drum is hard black anodized and teflon coated, scratch-proof and very hard-wearing. Chrome (CH): the drum, ST disks and ST arm are entirely chrome-plated. All chromed parts are highly polished, thickly nickel-plated and finally finished in chrome.
Simple opening: just unscrew the upper ring to immediately dismantle the winch for an easy of cleaning and maintenance. New self-tailing XT system: fixed upper disk with built in ST arm and self-regulating lower disk on springs. The new self-tailing adapts automatically to a wide range of rope diameters and, if overloading occurs, releases the line to avoid excess force on the ST arm. Knurling: the drum vertical knurling offers maximum horizontal friction allowing the rope lideupwards. Differentiated grip (aluminium drums only): minimum friction on the lower part where loads are higher and maximum at the top where loads are minimal: the result is an even grip along the entire drum. CNC base: machined by CNC (computer numeric control machines) is lighter and stronger than normal castings; aluminium made, hard black anodized and teflon coated. Easy removal from the winch makes maintenance a simple affair.