Antal Self Tailing Winches

Antal


Antal Self-Tailing Winches


Cruising Self Tailing
14 new self-tailing winches available in the following versions: Hard black aluminum(AL): the aluminum drum is hard black anodized, and Teflon coated, scratch-proof and very hard-wearing. Chrome(CH): the drum, ST disks and ST arm are entirely chrome-plated. All chromed parts are highly polished, thickly nickel-plated and finally finished in chrome.

Simple opening: just unscrew the upper ring to immediately dismantle the winch for an easy of cleaning and maintenance. New self-tailing XT System: fixed upper disk with built in ST arm and self-regulating lower disk on springs. The new self-tailing adapts automatically to a wide range of rope diameters and, if overloading occurs, releases the line to avoid excess force on the ST arm. Knurling: the drum vertical knurling offers maximum horizontal friction allowing the rope “slide” upwards. Differentiated grip (aluminum drums only): minimum friction on the lower part where loads are higher and maximum at the top where loads are minimal: the result is an even grip along the entire drum. NC base: machined by CNC (computer numeric control machines) is lighter and stronger than normal castings; aluminum made, hard black anodized and Teflon coated. Easy removal from the winch makes maintenance a simple affair.

Racing Self Tailing

XT R is the racing winch series obtained from the standard XT series. Self-tailing XT system, differentiated grip of the drum knurling, CNC base and skirt, fast opening screwed ring, axle with low friction PVD finishing.

And in addition to reduce the weight: aluminum stem, peek roller bearings for the drum and the main shaft lightened gears and main shaft. To reduce weight, XT series winches are mounted on bearings with peek resin roller on an aluminum stem. Antal alloy gears mounted on low-friction and hard wearing PVD treated axles; corrosion-proof insulating gaskets. The base, machined by the CNC process (produced with computer numeric control machines with no cast components), is lighter and stronger than normal castings.