Standing Rigging: Turnbuckles 

 

Turnbuckles are an essential component on almost any boat with standing rigging. With quality turnbuckles, you can get the precise adjustments you need to properly tune your rig. Turnbuckles are available for a variety of rigging styles and wire sizes. Turnbuckles are usually forged from bronze alloy with high specification chromium plating, to provide maximum strength and corrosion resistance. Some styles and attachments can be machined from stainless steel. Thread sizes vary to accommodate wire rigging of any size. Forks can be installed at either end as needed for easy attachment of backstays, shrouds, or forestay. Once the turnbuckles are attached, the rigging can be adjusted with just a simple twist. Turnbuckles enable you to tune your rig to the wind conditions, so your boat won't be too overpowered or under-powered. Just remember: Lefty-tighty, Righty-loosy!

Sta-Lok Turnbuckles

Sta-Lok offers a range of styles and fitting for their turnbuckles. Just choose the option you need for your rigging and wire size.

Stainless Steel Turnbuckle with Fork/Sta-lok

  • Manufactured from polished stainless steel seamless tube.
  • Turnbuckle supplied with machined fork and Sta-Lok, self fit, reusable stud.
  • Designed to fit most chain plates and fixing points.
  • For wire rigging sizes 1/8” to ¼”.

Stainless Steel Turnbuckle with Toggle/Sta-lok

  • Manufactured from polished stainless steel seamless tube.
  • Turnbuckle supplied with stainless steel toggle and Sta-Lok self fit, reusable stud.
  • Designed to fit most chain plates and fixing points.
  • For wire rigging sizes 1/8" to 7/32".

Supajust Turnbuckle with Fork/Sta-lok

  • High Specification stainless steel open body turnbuckle.
  • Threaded bronze Inserts ensure superb adjustment without seizing or galling.
  • Turnbuckle supplied with threaded fork and Sta-Lok self fit, reusable stud.
  • Designed to fit most chain plates and fixing points.
  • For wire rigging sizes 1/4" to 1”.

Supajust Turnbuckle with Toggle/Sta-lok

  • High specification stainless steel open body turnbuckle.
  • Threaded bronze Inserts ensure superb adjustment without seizing or galling.
  • Turnbuckle supplied with stainless steel toggle and Sta-Lok self fit, reusable stud.
  • Wire sizes ¼” to 3/8” fitted with Long Reach toggle
  • Wire sizes 7/16” to 9/16” fitted with standard toggle

Forged Bronze Turnbuckle with Fork/Sta-lok

  • Elegant design.
  • Forged from high strength bronze alloy.
  • High quality polished chromium finish.
  • Stronger than the wire rope.
  • Turnbuckle supplied with Threaded Fork and Sta-Lok Self Fit, reusable stud.
  • For wire rigging sizes 1/8” to ½”.

Forged Bronze Turnbuckle with Fork/Blank

  • Elegant design.
  • Forged from high strength bronze alloy.
  • High quality polished chromium finish.
  • Stronger than the wire rope.
  • Turnbuckle supplied with Threaded Fork End.
  • Wide selection of end fittings available.

Forged Bronze Turnbuckle with Toggle/Sta-lok

  • Elegant design.
  • Forged from high strength bronze alloy.
  • High quality polished chromium finish.
  • Stronger than the wire rope.
  • Toggle action gives full articulation.
  • Turnbuckle supplied with Toggle End and Sta-Lok Self Fit Stud.
  • For wire rigging sizes 1/8” to ½”.

Forged Bronze Turnbuckle with Toggle/Blank

  • Elegant design.
  • Forged from high strength Bronze alloy.
  • High quality polished chromium finish.
  • Stronger than the wire rope.
  • Toggle action allows full articulation.
  • Wide selection of end fittings available.
  • Thread sizes ¼" to 7/8".

 

.

rigging-----turnbuckles-----wire

Turnbuckle<br>SS Fork/Sta-Lok
Turnbuckle<br>SS Toggle/Sta-Lok
Turnbuckle<br>Supajust Fork
Turnbuckle<br>Supajust Toggle
Turnbuckle<br>Fork & Sta-Lok
Turnbuckle<br>Fork & Blanks
Turnbuckle<br>Toggle & Sta-Lok
Turnbuckle<br>Toggle & Blank
   

PayPal © Site content copyright Mauri Pro Sailing, LLC. All rights reserved
Site developed by Mauri Pro Sailing
Mauri Logo