Flying Scot Sailboat Parts and Sailing Equipment at Mauri Pro Sailing
Flying Scot Sailboat Parts and Sailing Equipment470

Flying Scot One-Design - Parts and Rigging

Flying Scot: Competitive Racing and Fun Family Sailing

Over forty years of sailing and marine construction experience produced the Flying Scot, a Sailing Hall of Fame design. This 19 foot, stable center-boarder is easy-to-sail, forgiving and fun The Flying Scot can be single-handed, raced with a crew of two or three, or can accommodate up to 8 people in the cockpit. It's versatility makes it great for racing as well as family daysailing. The Flying Scot's competitive one-design fleet makes for tight, tactical racing.

Designed in 1957 by the internationally famous racer Gordon K. "Sandy" Douglass, each Flying Scot is hand-crafted with the highest quality materials and methods. The first Scot ever built still wins races! The popularity of the Flying Scot is driven by a large sailing community and devoted one-design sailing association, and the boat has been used in several national youth and adult championships.

At Mauri Pro we have a range of parts, running rigging, sailing gear, and accessories that will help keep your Flying Scot in top sailing condition.

Flying Scot Specifications

Length Overall: 19 ft (5.8 m)
Beam: 8 ft ( 2 m)
Draft-Board Up: 8 in (.2 m)
Draft-Board Down: 48 in (1.2 m)
Mast Height: 28 ft (8.6 m)
Sail Area, Main & Jib: 191 sq. ft (17.65 sq. m)
Sail Area, Spinnaker: 200 sq. ft ( 18.6 sq m)
All Up Weight: 1200 lb (545 kg)


Mainsheet System

Flying Scot Mainsheet Parts
This efficient mainsheet system features an automatic load-sensing Ratchamatic block mounted to a swivel base that rotates to face the trimmer. The ratchet mechanism can be set to increase holding power in big air or turned down so the mainsheet runs freely when the wind is light. The lack of a traveler track keeps the system simple and minimizes parts and hardware.



Cunningham System

Flying Scot Cunningham Parts
This 6:1 cascading system cleats on the centerboard trunk and provides plenty of power to play the cunningham from either side of the boat. The purchase allows for easy, precise adjustments to the sail shape, so the Flying Scot can be optimized for all types of sailing conditions. Parts can easily be swapped out on the cunningham system.


Boom Vang

Flying Scot Boom Vang Parts
Built of lightweight 40 mm Carbo blocks, this free-running system provides plenty of power to play the cunningham from either side of the boat. The central cleating location just aft of the centerboard trunk makes it easy to adjust the vang from either side of the boat. The simple, easily accessible setup on the Flying Scot makes if easy to swap out parts.



Sheets and Control Lines
Boom Vang
Cunnigham System
Mainsheet System

© Site content copyright Mauri Pro Sailing, LLC. All rights reserved
Site developed by Mauri Pro Sailing
Mauri Logo