Harken Electric Winch ComponentsHarken
 

Harken Electric Winches
Harken Electric Winches each require one control box, one breaker, and two switches. Harken recommends adding a load controller on all winches for safety and to protect the winch, however it is only required vertical winches size 46 and larger, and on 24V horizontal winches size 50 and larger. The typical wiring diagram shown here includes a load controller.

Switches for electric winches are waterproof and should be ordered in pairs. One switch is needed for each speed of a two-speed winch.

Electric Control Boxes contain solenoids to operate the winches. Control box selection is based on winch size and voltage, and one control box is required for each electric winch.

High Amperage Circuit Breakers are compact, waterproof, weather-resistant, and ignition-protected. Circuit breakers are available for 12- or 24- volt DC systems.

Load Controllers are electronic systems that protect Harken winches from overload by temporarily interrupting the power supply to the winch. The Load Controller comes installed with standard overload settings set for the winch model it is designed for, but can be customized on request.

Harken offers five panel-mount, high-amperage circuit breakers. They are compact, waterproof, weather-resistant, and ignition-protected. Circuit breakers are available for 12- or 24-volt DC systems.

Each electric winches require one control box, one breaker, and two switches. Harken recommends adding an optional load controller. For winches larger than B980, please contact Harken. Hydraulic units require two switches.

Electric control boxes contain solenoids to operate the winches. Based on winch size and voltage, select one control box for each electric winch.

Each electric winches require one control box, one breaker, and two switches. Harken recommends adding an optional load controller. For winches larger than B980, please contact Harken. Hydraulic units require two switches.

The winch load controller is an electronic system that protects Harken winches from overload by temporarily interrupting the power supply to the winch. The Load Controller comes installed with standard overload settings, but can be customized on request. Use WLC200R with RadialĀ® winches. 

Each electric winches require one control box, one breaker, and two switches. Harken recommends adding an optional load controller. For winches larger than B980, please contact Harken. Hydraulic units require two switches. 

Harken offers simple, waterproof switches for electric and hydraulic winches. Order two switches for each winch.

Each electric winch requires one control box, one breaker, and two switches. Harken recommends adding an optional load controller. For winches larger than B980, please contact Harken. Hydraulic units require two switches. 



Selection Guide


Order components to complete your electric winch installation. Selection is based on winch size and voltage.

Winch Size Switches (2) Control Box Circuit Breaker Load Controller
12 V 24 V 12 V 24 V 12 V 24 V
Radial / Performa Winches
40.2 STE BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1717 HCP1717 WLC200R.40.12 WLC200R.40.24
46.2 STE BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1717 HCP1717 WLC200R.46.12 (Hor.)
WLC200RV.46-50.12 (Ver.)
WLC200R.46.24 (Hor.)
WLC200RV.46-50.24 (Ver.)
50.2 STE BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1720 HCP1717 WLC200R.50.12 (Hor.)
WLC200RV.46-50.12 (Ver.)
WLC200R.50.24 (Hor.)
WLC200RV.46-50.24 (Ver.)
60.2 STE BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1720 HCP1717 WLC200R.60-70.12 (Hor.)
WLC200RV.60-70.12 (Ver.)
WLC200R.60-70.24 (Hor.)
WLC200RV.60-70.24 (Ver.)
60.3 STE BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1720 HCP1717   WLC200R.60.3-70.3.24 (Hor.)
WLC200RV.60.3-70.3.24 (Ver.)
70.2 STE BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1720 HCP1717 WLC200R.60-70.12 (Hor.)
WLC200RV.60-70.12 (Ver.)
WLC200R.60-70.24 (Hor.)
WLC200RV.60-70.24 (Ver.)
70.3 STE BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1720 HCP1717   WLC200R.60.3-70.3.24 (Hor.)
WLC200RV.60.3-70.3.24 (Ver.)
80.2 STE BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1720 HCP1717   WLC200RHV.80-1000.24
80.3 STE BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1720 HCP1717   WLC200RHV.80.3-1000.3.24
Rewind Winches
40RW BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1717 HCP1717 WLC200R.40.12 WLC200R.40.24
46RW BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1717 HCP1717 WLC200R.46.12 WLC200R.46.24
60RW BRS104/P or BRS102 BEB1000.12.1 BEB1000.24.1 HCP1718 HCP1717 WLC200R.60-70.12 WLC200REW.60.24
Winch<br>Circuit Breakers
Winch<br>Control Boxes
Winch<br>Load Controllers
Winch<br>Switches
 

PayPal © Site content copyright Mauri Pro Sailing, LLC. All rights reserved
Site developed by Mauri Pro Sailing
Mauri Logo