Midrange 27 mm
Harken Midrange 27 mm Traveler Cars are built to handle high loads on boats from 27 ft to 34 ft (8 m to 10 m).
The one-piece solid aluminum construction is lightweight and strong. Ball bearings run on machined-aluminum, hardcoat-anodized races for smooth trimming and easing. Stainless steel wire guides keep balls captive when the car is off the track. Shackle/toggle cars have low pivot points to handle nonvertical loads.
For a high-performance system, attach Carbo or Black MagicÂ® ball bearing control blocks to stand-up toggle ears, reducing load on the car so bearings don’t bind. Pair with Carbo block end controls for reduced friction and a smooth-running system.
ESP systems feature cars with built-in, axle-bearing control blocks. Pair with axle-bearing ESP end controls for durability and strength.
Race once with the Harken 27 mm Windward Sheeting Traveler Car and you’ll never race without one again. Pull the car above the centerline without releasing the leeward control line. The tack and car stay in the same position, ready to be pulled to the new windward side.For use with a 2:1, 3:1, or 4:1 purchase system.
Cars are one-piece solid aluminum construction with captive balls. Mount track in the cockpit or near deck level. Fits dinghies to large offshore boats. Captive balls make cars easy to load and maintain. Wire guides circulate bearings smoothly.
For a high-performance system, attach Carbo or Black MagicÂ® ball bearing control blocks to stand-up toggle ears, reducing load on the car so bearings don’t bind. Pair with Carbo block end controls for reduced friction and a smoothrunning system.
Harken Midrange 27 mm ESP Track End Controls are value-oriented options for the installation of 2:1 to 5:1 systems. Designed for strength and durability, controls feature axle bearing sheaves with sideload ball bearings. Carbo-CamÂ® cleats provide precise cleating for the perfect traveler adjustment.
Use E2750HB double-sheave end controls for cabintop travelers with cars using 3:1 or 4:1 purchases. Contact HarkenÂ® to order special length track with mounting holes for E2750HB end controls.
Harken Midrange 27 mm Track End Controls are high-performance and allow users to installation with 2:1 to 5:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with DelrinÂ® ball bearings let cars instantly adjust and release under load. Assemblies secure to track, eliminating additional holes. Tough one-piece bases and cam arms are machined from a single piece of aluminum. Compact, low-friction block components combined with Carbo-CamÂ® cleats keep weight minimal.
Harken Midrange 27 mm Accessories include toggles, control block kits, and track risers. Stand-up toggles hold blocks upright on travelers. Stand-up toggles with control tangs allow attachment of control blocks. Control block kits are available for Midrange cars with ESP controls and ESP end controls to upgrade purchase from 1:1 to 4:1. Use 1849 Track risers for mid-boom travelers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight or curved track. Sold in pairs.
Â·Â High-stength aluminum
Â·Â Torlon ball bearings
Â·Â Soft/hard attachments
Â·Â Built-in control blocks
Â·Â 816 - 1633 kg MWL