Harken Roller CRX Traveler Division
has been supplying racers and
cruisers with innovative hardware for over 20 years. Whether you use
custom solutions or require something new, our engineers hold your project
to the highest standards: from design, to manufacturing, finishing, installation,
and worldwide service.
Harken CRX Roller Traveler
carries almost double the load at half the
weight of similarly sized traveler cars. Torlon® rollers provide increased
bearing contact over balls to handle higher loads. Captive bearings
make cars easy to load and maintain.
Harken PCRX Mainsheet Traveler
a hinged track that pivots as the mainsheet angle changes. This design
the load for less friction, more load capacity, and lighter weight.
Eliminating the toggle reduces the car’s height and weight. Mini-Maxi
PCRX traveler systems are used on America’s Cup and Volvo racers,
with Big Boat versions on TP52s and IRC 70s.
Toggle cars such as the 3074 and 3075 offer a low-profile traveler solution. CRX Loop cars are alternatives for high-load applications. Use roller travelers with straight track only. Contact Harken for curved traveler applications. Big Boat CRX track uses E3200 endstops and 3173 or 3174 end controls. Mini-Maxi track uses 1702 or custom endstops.
Harken Track 32 mm CRX
is available in two lengths - 2m and 3m. The height of the track is 7/8" (22 mm). It is a low-beam roller style track. The hole spacing is set at 2 15/16" (75 mm) increments. Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface.
Harken Track 42 mm CRX
is available in one length - 3m. It is a low-beam roller style track. The hole spacing is set at 2 15/16" (75 mm) increments. Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface.