Hoist your halyards with our assortment of lead and mast base blocks
to help you make it to the top. Combine mast base blocks with lead blocks
to give you added purchas
e to hoist. Technical assistance is available
to help you get the system you need to get your halyard to the top
of the mast.
About Antal Halyard Blocks
The whole "composite fibre" range uses sheaves on composite fibre bearings and double self-captive Delrin ball thrust bearings. The sheaves are easy to dismantle for cleaning and need no lubrication.
The sides are made of 3571 TA16 light alloy and are thickly anodized to ensure absolute wear-and corrosion proofing, with all the edges smoothed off for better handling. The nuts and bolts have been replaced with recessed screws and pins, considerably reducing weight and eliminating any projecting parts.
The steel coupling revolves on a fibre washer and can easily be locked in one of two main positions.
About Harken Mastbase Halyard Lead Blocks
Harken Mastbase Halyard Lead Blocks
are lightweight and can be grouped in a small area at the mastbase. Flared cheeks prevent chafe on the halyards.
The high-load bearing system has PTFE composite bushing, sideload balls. Hardcoat-anodized aluminum sheave for additional strength.
About Lewmar Halyard Blocks
Racing Blocks from Lewmar are designed to achieve the best strength-toweight ratio within legal race limits. Use these High Load Block for your Halyard to help you hoist and hold your halyard in place. Impregnated composite bearings with dual Delrin side thrust races, ideal for high static loads. Low-profile head fits into pad eye for lowest lead to winch. Alloy sheaves profile for H.M.P. E. line such as Spectra, Dyneem or Vectran.
About Schaefer Half-Moon Mast Base Blocks
Schaefer Half-Moon Mast Base Blocks
provide a strong and smooth option for leading your hayards and control lines to the sailboat cockpit. Choose from four different models, all featuring a heavy duty S.S. cage, polished and buffed to a mirror finish. Sheaves are machined aluminum and run on Schaefer's self-lubricating Nomex™/Teflon™ Bearing. UC models incorporate Delrin™ Ball Bearings for additional friction reduction.
About Shaefer Halyard Lift Blocks
Lead your sail halyards aft safely and smoothly with
Schaefer's Halyard Lift blocks
. Machined Aluminum cage desing follows high-load patterns for a very strong yet light block. Aluminum sheave runs on a Nomex™/ Teflon™ bearing and includes Delrin™ ball bearing keeping friction to a minimum.
About Shaefer Lead Blocks
Lead your sail halyards aft safely and smoothly with the
Schaefer M-Series Lead Blocks
. Machined Aluminum cage design follows high load patterns for a very strong yet ligh sailboat block. Aluminum sheave runs on a Nomex™/ Teflon™ bearing and includes Delrin™ ball bearings keeping friction to a minimum.
About Shaefer Stand-Up Swivel Blocks
Schaefer Stand Up Swivel Blocks
are excellent for fixed position halyard, sheet or control line fairleads. Block swivels 360º, tilts in all directions and is supported by a heavy gauge S.S. sprint to prevent deck contact. Large diameter base helps distribute loads to a larger surface area than other smaller designs.
M-Series Schaefer Stand Up Block
features Aluminum sheaves with Torlon™ rollers and Delrin™ ball bearings for superior strength and low-friction. Machined center allows the hub to be used as a bracket.
Mauri Pro Sailing
are fully committed to be your
specialist not only providing the sailing community with a comprehensive and easy to use web site but with all the appropriate technical information that you might need to select your sailboat hardware and equipment. If you need any assistance selecting the appropriate
for your boat please
. Our crew is ready to help!