Choose your currency:
Harken Unit 3 Jaw/ Jaw w/ link plate w/ 7/8 in. (22.2 mm) Clevis Pin
Original Price: $ 984.00
Price: $ 865.99
Harken Unit 3 Jaw/ Jaw w/ link plate w/ 3/4 in. (19.1 mm) Clevis Pin
Original Price: $ 848.00
Price: $ 745.99
Harken Unit 3E Extra 7 ft. (2.13 m) Luff Foil Extrusion
Original Price: $ 176.00
Price: $ 140.99
Harken Unit 3E Extra 9 3/4 (248 mm) Connector w/ Bushings
Original Price: $ 77.00
Price: $ 61.99
Harken 22 Rod adaptor stud (thread ? UNF 3/4 in.)*
Original Price: $ 653.00
Price: $ 522.40
Harken Cruising Furling System 3E Electric
Designed for large cruising boats, Harken 3E Electric Furling is a headsail system that helps you get the most out of your boat, while letting you comfortably reef, furl, and set sails from the cockpit with the push of a button.
High-Strength Materials, Sculpted Design :
The torque tube, motor, and gear housing are deep-saturation hardcoat-anodized, UV-stabilized aluminum. The sculpted gear box and streamlined motor housing is sealed with high-quality lip seals. The motor mounts vertically into pulpits, clearing anchor tackle and providing low windage.
High-Torque, High-Efficiency Motor :
The motor is a permanent magnet design and features high torque and low power consumption. Inside, the hardened steel gears are permanently lubricated. The reversible drive uses a high-reduction worm gear set to prevent reefed sails from unfurling under load.
Easy to Install or Upgrade :
C-shaped connectors slip over the headstay without feeding wire through the connector. The lower unit fits over the existing turnbuckle allowing easy length adjustment. Easy upgrade from a MKIV Unit 2 and 3 manual unit.
1. Strong Foil Joints- Tough triple-interlock foil joints withstand years of torque loading.
2. 12- or 24-Volt Systems- Available in 12 or 24 volts; switches and 12- or 24-volt control box and circuit breaker included.
3. mergency Manual Operation- Use supplied crank handle or cordless drill adapter.
4. Scratch-Resistant Link Plates- Stainless steel link plates fit over standard turnbuckle, resist scratches, and can be easily repolished.