Mainsail Covers are ordered by boom length.
If you need to find out the length of your sailboat boom, click here:
Mauri High Neck Mainsail and Boom Cover
The High Neck Boom Cover is manufactured
from solution dyed Acrylic with polyester or nylon webbing, and a YKK #10
top zip closure. It incorporates the stack of the mainsail and wraps around the front of
the mast and under the boom. It is closed at the forward end of the mast
with a zipper (closing from the bottom up) and has a webbing strap with
Velcro closure around the mast at the top of the cover to prevent the zipper
from accidentally opening. Closure under the boom is by adjustable webbing
straps with snap black buckles placed every 600 mms.
Mauri Horse Blanket Mainsail and Boom Cover
The Horse Blanket Boom Mainsail Cover is suitable
for mainsails that detach from the mast and are flaked on the boom. It
is manufactured from solution dyed Acrylic with polyester or nylon webbing.
The cover is closed at the forward end of the mast with a zipper (closing
from the bottom up) and has a webbing strap with Velcro closure around
the mast at the top of the cover to prevent the zipper from accidentally
opening. The Mauri horse Blanket Mainsail cover Closure under the boom is by adjustable webbing straps with black
snap buckles placed every 600 mms. When ordering, select closest size
to actual boom length.
Mauri MZ Style Mainsail and Boom Cover
Our MZ Style (stay in boom) Mauri Mainsail cover is manufactured
from solution dyed Acrylic and is supplied complete with sail cover, mast
collar, line and blocks.This product consists of a boom cover, stiffened at the top with battens
and with a zippered flap to close the top and protect the mainsail from
UV damage. The zipper slider on the lap closes aft to forward with a lanyard
making top closure simple.The cradle wraps around the mast and is fitted with zipper at it’s
forward end. When sailing the mast section can be folded back inside the
cover where it is held by press clips.The zip sliders are fitted with
lanyards and close bottom up.
Mauri MZ Mainsail Cover
lines are supplied in three
(a) the forward and after support V’s with spliced eyes to fit over
the batten and with fitted blocks.
(b) An upper inverted V with spliced eyes and shackles for attaching to
the beckets of the blocks on the lower V’s and fitted with a block
in the apex of the V.
(c) The upper line with a spliced eye to attach to the block becket on
the inverted V with the downhaul end whipped and sealed with a mouse loop.
Line lengths are determined by a formula based on foot length but some
trimming of the mast downhaul may be required.
The MZ Style Mainsail Cover is normally attached to the boom by slides
or bolt rope which are selectable online but custom options can be accommodated
if specific detail is supplied.
All zippers are white YKK # 10 with plastic sliders.