Antal Batten System HS22 TracksAntal
HS22 Standard Track HS22 Carbon Track HS22 Carbon Track Fixing HS22 Carbon Track Side Plates
ANTAL HS22 TRACKS
Part No Type Mast
Direction
Mounting
Style
Height Width Length Hole
Spacing
Weight Screws Max Boat
Size
HS22311 Standard - Direct 11mm
(7/16 in)
22mm
(7/8 in)
3m
(9.84 ft)
120mm
(4 47/64 in)
340g/m
(12oz/3.28ft)
5mm
(13/64 in)
12.19m
(40ft)
HS22312 Standard - Direct 11mm
(7/16 in)
22mm
(7/8 in)
3m
(9.84 ft)
60mm
(2 3/8 in)
340g/m
(12oz/3.28ft)
5mm
(13/64 in)
12.19m
(40ft)
HS22221 Standard Vertical Slug 11mm
(7/16 in)
22mm
(7/8 in)
2m
(6.56 ft)
120mm
(4 47/64 in)
340g/m
(12oz/3.28ft)
5mm
(13/64 in)
12.19m
(40ft)
HS22222 Standard Vertical Slug 11mm
(7/16 in)
22mm
(7/8 in)
2m
(6.56 ft)
60mm
(2 3/8 in)
340g/m
(12oz/3.28ft)
5mm
(13/64 in)
12.19m
(40ft)
HS22321 Standard Horizontal Slug 11mm
(7/16 in)
22mm
(7/8 in)
3m
(9.84 ft)
120mm
(4 47/64 in)
340g/m
(12oz/3.28ft)
5mm
(13/64 in)
12.19m
(40ft)
HS22322 Standard Horizontal Slug 11mm
(7/16 in)
22mm
(7/8 in)
3m
(9.84 ft)
60mm
(2 3/8 in)
340g/m
(12oz/3.28ft)
5mm
(13/64 in)
12.19m
(40ft)
HS22330 Carbon
Racing
- Glued 15.7mm
(5/8 in)
32mm
(1 17/64 in)
3m
(9.84 ft)
- 560g/m
(19.75oz/3.28ft)
- 18.28m
(60ft)
HS2213 Simple
End Fitting
- - - - - - - 2 x 5mm
(13/64 in)
-
HS2203 Simple Carbon
End Fitting
- - - - - - - 2 x 5mm
(13/64 in)
-
HS2211 Track Loader - - - - 176mm
(6 15/16 in)
- 100g
(3.52 oz)
2 x 5mm
(13/64 in)
-
HS2201 Carbon
Track Loader
- - - - 500mm
(19 in)
- 300g
(10.58 oz)
- -
HS2212 Track Joint - - - - - - - 2 x 5mm
(13/64 in)
-
HS2202 Carbon
Track Joint
- - - - - - - - -
HS2205 Carbon Side
Plates
- - - 21mm
(53/64 in)
100mm
(3 15/16 in)
- - 6 x 5mm
(13/64 in)
-
Round Groove Slugs Flat Groove Slugs
ANTAL HS22 TRACKS SLUGS
Part No Groove T D H Screws
HS2204R Round
Groove
3.9mm
(5/32 in)
8.7mm
(11/32 in)
2mm
(3/32 in)
5 x 10mm
(13/32 in)
HS2205R Round
Groove
4.7mm
(3/16 in)
9.5mm
(3/8 in)
2mm
(3/32 in)
5 x 10mm
(13/32 in)
HS2205F Flat
Groove
4.7mm
(3/16 in)
18mm
(23/32 in)
4.6mm
(3/16 in)
5 x 10mm
(13/32 in)
HS2208F Flat
Groove
7.8mm
(5/16 in)
20mm
(51/64 in)
4.6mm
(3/16 in)
5 x 10mm
(13/32 in)
HS2210F Flat
Groove
9.8mm
(25/64 in)
20mm
(51/64 in)
2mm
(3/32 in)
5 x 10mm
(13/32 in)
HS2212F Flat
Groove
11.8mm
(15/32 in)
24mm
(61/64 in)
3mm
(1/8 in)
5 x 10mm
(13/32 in)
HS2214F Flat
Groove
13.6mm
(35/64 in)
24mm
(61/64 in)
3mm
(1/8 in)
5 x 10mm
(13/32 in)

Antal Full Batten HS Guide Systems

The Antal HS Guide System is designed for boats with full batten mainsails that experience high loads and compression-loading on the mainsail luff. The system’s aluminium sliders contain HS composite fibre inserts that run on aluminium track mounted on the mast. HS composite fibre is a new material that is durable over long periods of use and offers extremely low friction coefficients. The material is made from special resins strengthened with fibre and is self lubricating.

The HS Guide System provides the following advantages:
  • the low friction properties of the HS composite fibre allows the cars to be shorter than standard ball-bearing car systems, thereby reducing the stacking height at the mast when the sail is down
  • the lower cars can easily be removed from the track when the sail is reefed, thereby keeping the tack low to the boom
  • minimum friction under load
  • less maintenance than ball bearing car systems;
  • cars can easily be removed and re-installed on the track whenever the mainsail is changed.
Each batten end fitting is attached to a slider with a triaxial joint to ensure that the batten can freely orient itself under all points of sail. At least one simple slider should be attached to the sail with nylon webbing between two battens. A headboard is attached to the sail with webbing and is secured to the slider (double or triple) with a clevis pin which allows the headboard to pivot and to be removed.

Currency:
ANTHS2211 - Antal Full-Batten System 40 Track Loader w/ Pin-Stop Gate
Code: ANTHS2211
Price: $253.40
ANTHS2212 - Antal Full-Batten System 40 Track Joint w/Mounting Screws
Code: ANTHS2212
Price: $7.49
ANTHS2213 - Antal Full-Batten System 40 Track End Fitting
Code: ANTHS2213
Price: $8.45
ANTHS2215 - Antal Full-Batten System 40 Track Mounting/Installation Tool
Code: ANTHS2215
Price: $37.44
ANTHS22221 - Antal Mast Track 40 w/ Slug and Direct Mount (2 meters) 120 mm Spacing
Code: ANTHS22221
Price: $94.08
ANTHS22222 - Antal Mast Track 40 w/ Slug and Direct Mount (2 meters) 60 mm Spacing
Code: ANTHS22222
Price: $123.80
ANTHS223213 - Antal Mast Track 40 w/ Slug and Direct Mount (3 meters) 120 mm Spacing
Code: ANTHS223213
Price: $149.80
ANTHS223223 - Antal Mast Track 40 w/ Slug and Direct Mount (3 meters) 60 mm Spacing
Code: ANTHS223223
Price: $176.60
ANTHS22SLUG - Antal Mast Track 40 - Set of Slugs w/ Mounting Screws (17 per kit)
Code: ANTHS22SLUG
Price: $69.12
     

PayPal © Site content copyright Mauri Pro Sailing, LLC. All rights reserved
Site developed by Mauri Pro Sailing
Mauri Logo