close
New England RopesNew England Ropes - Salsa Line 3/8 in. - 10 mm
 

Ultra strong, ultra soft sheet for larger one designs and keelboats, your hands will love this soft and exceptionally strong single braid constructed of Dyneema® SK75 plus spun filament polyester.

• Low elongation.
• E excellent hand/grip.
• K knik-free, spliceable.

Applications:
• Mainsheets.
• Genoa Sheets.
• Traveler Lines.

Part Number: NESAL12


Specifications
Size Weight Tensile
Imperial Metric lb/100' g/m lb kg
1/4" 6 mm 1.8 26.9 2850 1294
5/16" 8 mm 3.0 44.6 4000 1814
3/8" 10 mm 3.5 52.1 5000 2444

Sunlight/UV: Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals: Polyester has good resistance to most chemicals except 95% sulfuric acid and strong alkalines at boil. HMPE has good resistance to most minerals, organics, acids, and weak alkalines. HMPE also has excellent resistance to bleaches and other oxidizing agen

Heat: Polyester melts at 480°F with progressive strength loss above 300°F. HMPE melts at 300°F with progressive strength loss above 150°F.

Dielectrics: Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of life circuits.

Sheaves: Recommended sheave diameter to rope diameter is 8:1.

Working Loads: No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.


Click Image to Zoom
    Code: NERSL95
    Price: $1.95
    Original Price:$2.42
    (You Save: $0.47)

    Currency:
    Color:
    Quantity:

    * Price is per foot

    PayPal © Site content copyright Mauri Pro Sailing, LLC. All rights reserved
    Site developed by Mauri Pro Sailing
    Mauri Logo