close
New England RopesNew England Ropes - 3-Strand Nylon White 1/2 in. - 12 mm.
Product Description
 

Manufactured from premium grade high tenacity nylon fiber treated with a proprietary Marine-Tech coating to improve fiber-to-fiber abrasion resistance.

• Extremely lightweight.
• Floats.
• Does not kink.

Applications:
• Dinghy mainsheets.
• Dinghy control lines.
• Halyard Tails.

 
Specifications  
Size Weight Tensile
Imperial Metric lb/100' g/m lb kg
1/4" 6 mm 1.5 22.3 2000 908
5/16" 8 mm 2.5 37.2 3000 1362
3/8" 9.5 mm 3.5 52.1 4400 1998
7/16" 11 mm 5.0 74.4 5900 2679
1/2" 12 mm 6.5 96.7 7500 3405
9/16" 14 mm 8.2 122.0 9400 4268
5/8" 16 mm 10.0 148.8 12200 5539
3/4" 18 mm 13.6 202.4 16700 7582
7/8" 22 mm 18.7 278.3 23500 10669
1" 24 mm 26.4 392.8 29400 13348
 

Sunlight/UV: Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals: Nylon will degrade with strong oxidizing agents, mineral acids, and 90% formic acid. May discolor when exposed to high levels of carbon dioxide.

Heat: Nylon melts at 460°F with progressive strength loss above 300°F.

Dielectrics: Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Sheaves: Recommended sheave diameter to rope diameter is 8:1.

Working Loads: No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.
Click Image to Zoom
    Code: NER703STRAND12
    Original Price:$1.01
    Price: $0.71
    (You Save: $0.30)

    Currency:
    Quantity in Basket: None
    Quantity:

    * Price is per foot

    Need help with this product?
    Live Chat
    PayPal © Site content copyright Mauri Pro Sailing, LLC. All rights reserved
    Site developed by Mauri Pro Sailing
    Mauri Logo