Harken's Rewind Radial Electric Winch is exactly what cruisers have been looking for in push-button sail control. Now you can ease and trim loaded sails in both directions without ever taking the line out of the self-tailer.

In standard mode, Rewind works exactly the same as a Harken 2-speed winch. But flip the red knob on the winch base and the patented rewind function activates. You can adjust sail with fingertip control without ever going to the winch and manually releasing the line from the drum.

• Rewind operates like a standard Harken 2-speed electric winch-fast for speed, slow for power.
• The rewind function is activated by turning the red knob on the winch base. Sails can be trimmed and eased from a remote location using the twin in/out buttons.
• A Harken locking handle inserted into an unloaded winch automatically disconnects the motor gear for manual operation.
• The Rewind has a 12-volt horizontal motor.

Use for:
Use to trim loaded jibs, mainsheets and to raise and lower halyards on boats from 35 to 48 ft (10.6 to 14.6m).

Components for 12V / 24V (not included - sold separately):
Control Box BEB1000.21.1 / BEB1000.24.1
Circuit Breaker HCP1717 (for both)
Load Controller WLC200R.46.12 (Recommended for 12V) / WLC200R.46.24 (Required for 24V)

Part Number: 46RWC