Harken's Rewind Radial Electric Winch is exactly what cruisers
have been looking for in push-button sail control. Now you can
ease and trim loaded sails in both directions without ever taking
the line out of the self-tailer.
In standard mode, Rewind works exactly the same as a Harken
2-speed winch. But flip the red knob on the winch base and the
patented rewind function activates. You can adjust sail
with fingertip control without ever going to the winch
and manually releasing the line from the drum.
• Rewind operates like a standard Harken
2-speed electric winch-fast for speed, slow
• The rewind function is activated by turning
the red knob on the winch base. Sails can be
trimmed and eased from a remote location
using the twin in/out buttons.
• A Harken locking handle inserted into an
unloaded winch automatically disconnects
the motor gear for manual operation.
• The Rewind has a 12-volt horizontal motor.
Use to trim loaded jibs, mainsheets and
to raise and lower halyards on boats from
35 to 48 ft (10.6 to 14.6m).
Components for 12V / 24V (not included - sold separately):
Control Box BEB1000.21.1 / BEB1000.24.1
Circuit Breaker HCP1717 (for both)
Load Controller WLC200R.46.12 (Recommended for 12V) / WLC200R.46.24 (Required
Part Number: 46RWA