close
Harken up to 15% off!
HarkenHarken Size -17 Integral Backstay Cylinder - 45 mm Bore; 385 mm Stroke
 

Harken’s integral hydraulic backstay adjuster provides the power to optimize sail shape quickly. The cylinder features a built-in, double-acting pump that delivers oil when the handle is both pushed and pulled. This moves oil through the system twice as fast as single-acting pumps on other integrals.

Assemblies include a hardcoat-anodized aluminum cylinder and pump, valve, gauge, and stainless pump handle with three attachment options: pin installs handle permanently; O-ring secures handle in socket, but is not permanent; nonlocking handle installs without O-ring and roll pin. All pins and plugs are stainless steel. Cylinders include a clevis on both ends. Standard eye-jaw toggles fit all Harken® cylinders.

The pressure release knob turns clockwise to close and pump, counterclockwise to release. When closing the pump, the knob cannot be over-tightened by hand, preventing damage to the valve. Release speed depends on how far open the knob is turned. Pressure relief is factory set to prevent crew from over-tensioning the backstay.

An analog gauge with pressure increments reading 0-5 (0-5000 psi) is prominently mounted at the top of the cylinder. The gauge adjusts to four positions for easy viewing from the cockpit.

Part Number: HCI040160385BCC


Specifications
Imperial Metric
Maximum Wire Dia. 3/8" 9.5 mm
Gap/pin Dia. 5/8" 15.9 mm
Stroke 15.2" 385 mm
Pin Center Length Closed 32.8" 832 mm
Breaking Load 20,984 lb 9518 kg
     

Click Image to Zoom
    Code: HARHYCI045160385BCC
    Price: $1,628.00
    Original Price:$1,875.00
    (You Save: $247.00)

    Currency:
    Quantity:

    PayPal © Site content copyright Mauri Pro Sailing, LLC. All rights reserved
    Site developed by Mauri Pro Sailing
    Mauri Logo