XS Scuba

The Thermo by XS Scuba's Valves are designed and manufactured for long life and heavy use. The Pro and dedicated DIN Manifolds are no exception. Manifold is made of marine grade brass with triple bright chrome plating for long life protection in salt water. Precision machined from high tension brass and chrome plated the valve stems will give years of service and corrosion free operation. Easy grip soft rubber hand wheel with stainless steel insert ensures long life and large ribs make turning handle easy even when wearing gloves.

Valve bonnets are copper crush washer sealed. Valve design is an 8.46in (215mm) center-to-center orientation and provides high gas flow for optimum regulator performance. On/Off seat built from high strength brass with nylon seat and Teflon plated for years of smooth operation. One-piece safety assembly protected within the body of the valve. Modular access plugs (R/L) included for use as single valves. Valve is equipped with 5/32in hex wrench dip tubes for positive retention and 3/4in x 14 NPSM inlet threads which fit nearly all DOT aluminum and modern steel cylinders. Both the Pro and dedicated DIN Manifolds meet the requirements of CGA V9-2009 standards.

The Pro version will accommodate both Yoke and DIN regulators with its removable 230 bar (3,336 psi) DIN inserts which can be removed using a 1/4in hex key wrench. Both manifolds are available in 3-pressure ratings of 2400, 3000 or 3442 psi (165, 200 or 230 bars) depending on cylinder to be used. The Pro version is Nitrox compatible up to 40% and the dedicated DIN is for air use only.

Product Features

  • 3/4in x 14 NPSM-Inlet
  • Hex Wrench 5/32in Tighten Dip Tube
  • Chromed Valve Stem
  • Easy Grip Rubber Hand-Wheel

Click Image to Zoom
XS Scuba PRO Manifold - 3000 psi
Original Price: $ 300.00
Price: $ 255.00

    © Site content copyright Mauri Pro Sailing, LLC. All rights reserved
    Site developed by Mauri Pro Sailing
    Mauri Logo