The Highland by XS Scuba 37lbs (16.78kg). This 360° full circle design wing is built-to-last with a 22-mil thick urethane bladder and a 1000D nylon cordura with urethane lamination outer-cover. The cover seams are sewn with #138 nylon bonded thread for strength and durability. The wing has three sets of 11-in (27.9 cm) on-center grommets that are made from heavy nickel plated brass. The cover is equipped with a YKK #5-Delrin zipper for access to bladder and the over-pressure valve (OPV) with pull-dump cord can be mounted on the lower left or right, your choice. The wing comes equipped with a center point mounted highland by XS Scuba's inflator assembly.
The Highland by XS Scuba inflator mechanism is a classic old school power inflator design which is also built-to-last. The Inflator is equipped with a 1-in (2.5 cm) Diameter corrugated oral inflation hose and a durable non-corrosive plastic body with chrome plated brass quick-disconnect (QD) bayonet fitting. A miflex low pressure quick disconnect inflator hose comes standard with the wing and inflator. The Highland by XS Scuba wing is black in color and is covered by a 24 month limited warranty.