The Console Combo has a durable scratch-resistant pressure gauge that is triple nickel-plated brass cased with tempered glass lens. The Gauge reads from 0 to 5,000 psi, has a simple unobstructed white faced dial for easy-reading. The Air-Spool is equipped with Viton O-rings for oxygen compatibility. The gauge has a built-in over-pressure relief valve for added safety and the gauge face is luminescent for easy-ready in low light or night diving conditions. Gauge has a Wide 270° degree Sweep for accuracy. Gauge is manufactured in Italy.
The Compass has a highly accurate movement with an allowable tilt of Up-To 22° degrees. The compass can be used for top or side reading with the side reading providing gun-sight accuracy when navigating. This Italian made instrument is calibrated for the Northern hemisphere. The compass is liquid filled for a quick and responsive movement. A ratchet bezel with compass headings in numerical 30 degree increments and 5 degrees indicator increments, bezel has twin heading indicators for alignment of compass course and a lubber line across the compass face. Compass card is luminescent for low light conditions.
Both instruments are housed in a durable impact resistant gauge boot with dual attachment points for a clip or lanyard. The pressure gauge is equipped with a 32in (81.3 cm) Miflex Nylon carbon HD braided 7/16-in threaded high pressure (HP) hose. The Miflex hose is 35% thinner and 50% lighter than traditional rubber HP hoses.