Highland by XS Scuba's Miflex Two Gauge Console is low profiled and ergonomically designed to fit in the hand comfortably, and is easy to read at a glance with its outstanding graphics. The Pressure Gauge has a chromed brass housing for strength and durability, and a luminescent gauge face for easy reading when night diving or in low light conditions. This compact gauge measuring a mere 1.96in (5 cm) in diameter and is 0.55in (1.4 cm) thick. The gauge has a readout of 0 to 5,000 psi and the air spool comes standard with Viton O-rings so its nitrox ready.
The New graphite carbon color hoses are factory cleaned and nitrox ready with Viton O-rings out-of-the-box. The hose has a durable abrasion resistant nylon exterior layer. High-pressure gauge hose is a lightweight, pliable pressure gauge hose that provide a much more enjoyable scuba experience. The hose is durable, compact and much easier-to-pack in a regulator bag than a traditional rubber hose. Hoses are equipped with standard 7/16-20 UNF male and 7/16-20 UNF female threaded ends. Hose fittings are made from durable corrosion resistant marine grade brass with electro-less nickel plating and the swivel end has a 0.55in (14 mm) deep air-spool well. The XS Scuba Miflex Carbon HP Hose is 32in (81.3cm) long has a working pressure of 4,500 psi (300 bars) and a burst pressure of 29,000 psi (2,000 bars).