The BTANKC tanks are made of high-grade linear synthetic materials, the same as all other rigid
VETUS tanks and they are available with capacities of 25, 40, 60 or 80 litres. The centre point
for a SAE flange gauge sender is incorporated in the molding together with 5 blind bolt
holes. The relevant gauge sender should be ordered separately and the appropriate hole
cut in the tank.
Each BTANKC tank is supplied with the following connections: Fixed hose connector Ø 19 mm for the breather line. Rotating hose connector Ø 38 mm with pick-up pipe, for waste water suction. A Ø 42 mm hole is provided for easy installation of an inlet fitting, type RT..B. This should be ordered separately according to the inlet hose diameter. If required, additional inlet fittings may also be installed. These tanks come complete with a screw down inspection lid installed.
(Length x Width x Height)
|Synthetic||Rigid||-||460 x 350 x 290mm|
|Synthetic||Rigid||-||660 x 350 x 290mm|
|Synthetic||Rigid||-||800 x 400 x 330mm|
|Synthetic||Rigid||-||1200 x 350 x 290mm|
|Synthetic||Rigid||-||1200 x 400 x 330mm|
|Synthetic||Rigid||-||1100 x 440 x 400mm|
|Synthetic||Rigid||-||1000 x 400 x 600mm|
|Synthetic||Rigid||-||1700 x 700 x 350mm|
|Synthetic||Rigid||-||1400 x 400 x 800mm|
|Synthetic||Rigid||-||430 x 300 x 320mm|
|Synthetic||Rigid||-||472 x 362 x 373mm|
|Synthetic||Rigid||682 x 362 x 373mm|
|Synthetic||Rigid||-||892 x 362 x 373mm|
* Oversize item
Due to the large size or weight of this item it is considered oversize and does not qualify for free shipping offers. Shipping by freight carrier may be required. Click here for more information.