The new models of the Cruise 4.0 have been improved to meet the demanding challenges of every day commercial use; making them ready to take on the harshest environmental conditions, for example with dinghies and sailboats up to 4 tons. This makes the Cruise even more rugged in the event that it runs aground and even better protected against corrosion when used extensively in salt water.
The lubricant-free polymer plain bearings protect against damage from fishing lines or debris and provide improved mechanical support for propeller shaft, and is wear-resistant and maintenance-free. It is available with short or long shaft – as the user needs. A power supply from at least one lithium battery (Power 26-104) or with lead batteries (lead-gel or AGM) must be provided for operation.
The Torqeedo Cruise 4.0 Tiller Steering Outboard Motor comes with input power 4,000 W, propulsive power comparable to a 8 HP gasoline outboard; integrated on-board computer with GPS and display; fuse and main switch; magnetic kill switch; 4AWG cable set (9.8ft); bridge cables for connection of batteries; and tiller control.
All Cruise models are suitable for inflatables and other small boats.
|Torqeedo Cruise 4.0 T Outboard Motor Specifications|
|Torqeedo Cruise 4.0 T|
|Input power in watts||4000|
|Propulsive power in watts||2240|
|Comparable petrol outboards (propulsive power)||8 HP|
|Comparable petrol outboards (thrust)||9.9 HP|
|Maximum overall efficiency in %||56|
|Static thrust in lbs*||189|
|Final charging voltage||_|
|Total weight in kg (lbs)||18.3 (S) / 19.4 (L)|
|Motor weight without battery in kg||_|
|Weight of integrated battery||_|
|Shaft length in cm||62.5 (S) / 75.5 (L)|
|Standard propeller(v = speed in km/h at p = power in watts)||v19/p4000|
|Alternative propeller options||v30/p4000, v8/p350|
|Maximum propeller speed in rpm||1,300|
|Tilting device||Manual with grounding protection|
|Trim device||Manual, 4-step|
|Stepless forward/reverse drive||Yes|
|Integrated on-board computer||Yes|
* Torqeedo static thrust measurement is based on internationally accepted ISO standards. Static thrust figures for conventional trolling motors are typically measured differently, which results in higher values. To compare Torqeedo static thrust data with conventional trolling motors, add approximately 50% to the Torqeedo static thrust values.
* Oversize item
Due to the large size or weight of this item it is considered oversize and does not qualify for free shipping offers. Shipping by freight carrier may be required. Click here for more information.
When shipped, must be packaged and labeled as a Hazardous Material (HazMat). Not eligible for shipments outside of the domestic U.S.
* Product is not eligible for returns