12in wide Double Bend AngleGuards are designed to fit a single SailPod or SystemPod. Single Bend AngleGuards are available in 1.25in diameter stainless steel tubing. This model is commonly used when upgrading a pedestal guard on a Lewmar (Whitlock) system.
TP225 TopPlate is used when converting a Lewmar (Whitlock) from 1in diameter pedestal guard to a 1.25in diameter Double Bend AngleGuards.
This Double Bend AngleGuards is also used with the TP325 Top Plate to adapt a 12.5in wide pedestal to a 12ft wide AngleGuard. This size was used on Merriman or Yacht Specialties steering systems on boats built during the 1970’s and 1980’s.
|12" Wide AngleGuards|
|Center to Center||12in / 30.48cm|
|Tubing Diameter||1.25 in / 3.175cm|
|Overall Height||62in / 157.48cm|
|Height of 1st Bend||34.25in / 86.99cm|
|Overall Depth||13in / 33.02cm|
|Bend Angle from Vertical||45 degrees|
|Angled Flat Length||13.5in / 34.29cm|
|Upper Vertical Flat Length||6.5in / 16.51cm|
Use AG226 when mountin GP2020, GP2030, GP2060 or GP2090 SailPod on the angle flat length (AL).