New England Ropes

New England's Poly Tec Cover is a blend of Technora and Polyester, offering excellent abrasion resistance and heat dissipation. With excellent cut resistance and a level of grip that other high tech fibers don't offer. Features a low-stretch Dyneema core.


  • Runner Tails
  • Mainsheets
  • Genoa Sheets
  • Spinnaker Sheets
Size Weight Tensile
Imperial Metric lb/100' g/m lb kg
1/4" 6 mm 3.0 44.8 5590 2536
5/16" 8 mm 4.2 62.7 8840 4010
3/8" 10 mm 5.4 80.6 13100 5942
1/2" 12 mm 6.6 98.5 21700 9843
9/16" 14 mm 9.0 134.3 34300 15558

Sunlight/UV: Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals: Polyester has good resistance to most chemicals except 95% sulfuric acid and strong alkalines at boil. HMPE has good resistance to most minerals, organics, acids, and weak alkalines. HMPE also has excellent resistance to bleaches and other oxidizing agents and to most solvents.

Heat: Polyester melts at 480°F with progressive strength loss above 300°F. HMPE melts at 300°F with progressive strength loss above 150°F. Technora melts at 1200' F.

Dielectrics: Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Sheaves: Recommended sheave diameter to rope diameter is 8:1.

Working Loads: No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.
Click Image to Zoom
New England Ropes - Poly Tec 10mm (3/8 in.)
Price: $ 4.91

    * Price is per foot

    © Site content copyright Mauri Pro Sailing, LLC. All rights reserved
    Site developed by Mauri Pro Sailing
    Mauri Logo