Edson Pull Pull Conduit

Edson’s Pull-Pull Conduit Systems are designed to provide the ability to run steering cables around spaces or structures that otherwise might be difficult or impossible with straight wire runs from sheave to sheave. Pull-Pull System components have been engineered to allow you to use stock parts that will result in a strong, reliable, and sensitive steering system. However, you must carefully follow the guidelines below to insure a system that is free of friction. Boats over 60’(18m) should use the larger size 312 Conduit and Fittings.

The conduit is available in one foot increments. The conduit can be easily cut with a hacksaw. Specify length when ordering.

Product Guidleines

  • Conduit should have no 90 degree bends on boats over 30', as it will make steering stiff
  • Use Edson Conduit Idlers whenever possible when conduit needs to make a turn
  • Conduit should be utilized only to make slight elevation changes and gentle bends
  • Conduit greasers should be used on all runs over 6'(2m)

Click Image to Zoom
Edson Conduit 3/4", Pull/Pull, Only, for 3/16" to 1/4" wire- Per Foot
Price: $ 26.95

    * Price is per foot

    © Site content copyright Mauri Pro Sailing, LLC. All rights reserved
    Site developed by Mauri Pro Sailing
    Mauri Logo