This is Dolphin Tech’s flagship air cell and it is packed with abundant features. It has perimeter bungee cords which compress the air cell to maintain a hydrodynamic profile when not fully inflated. The outer shell is extremely tough and wear-resistant and gives the best protection under the most testing conditions. There are 3 sets of marine-grade steel grommets allowing the fine-tuning of tank-BCD-diver positioning. Convenience in buoyancy control is provided through carefully positioned pull dumps.
Other features of the JT-65 include 3 sets of marine-grade stainless steel grommets allowing the fine-tuning of tank-BCD diver positioning. Inflator hoses and Dump valves are interchangeable for a variety of unique hose configurations. Convenience in buoyancy control is provided by strategically-positioned four (4) pull dumps located on the diver's side bladder lower left and top right, and tank side bladder, lower right and top left.
Instead of the typical and less substantial 200 Denier Nylon single- coated with TPU, Dolphin Tech's JT-65 outer shell is constructed of armor-like 1680 Denier Nylon with a double-coating of TPU, fully shielding the BCD from abrasion or punctures. But despite its remarkable strength, the Dolphin Tech BCD still maintains its surprising, superior lightweight characteristics.
Used in conjunction with the JT-65H and JT-65D, this is Dolphin Tech's flagship air cell, and abundantly worthy of the title. It's packed with features such as low drag/low snag bungee-style cords. Maintaining a sleek, hydro-dynamic profile when not fully inflated, the bands retract the BCD's width to less than the shoulders thereby greatly reducing drag and snag potential.
|Dolphin Tech Double Bladder Twin-Tank Air Cell JT-65|
|Model||Style||Buoyancy Capacity||Primary Bladder Material||Redundant Bladder Material||Shell Material||Primary Inflator||Redundant Inflator|
|DOLJT65||Horseshoe||65 lbs (29.5 kg)||210 TPU Nylon||210 TPU Nylon||1680D PU||16 in (40.6 cm)||19 in (48.2 cm)|