Race once with the Harken Windward Sheeting Traveler Car and you’ll never race without
one again. Pull the car above the centerline without releasing the leeward
control line. The tack and car stay in the same position, ready to be pulled
to the new windward side.
The cams on a Harken windward sheeting car automatically cleat and release during the tack, letting crew stay on the high side and minimizing movement. You never have to touch the leeward control line because when you tack, the car stays where you left it and a special mechanism uses the mainsheet load to release the leeward cleat. The only thing you need to do is draw the car above the centerline. You'll never want to sail without one again. Harken has windward sheeting travelers for everything from small sport boats to boats up to 13.7 m (45 ft). You can convert most existing Harken travelers with a retrofit kit.
When replacing cam cleats on windward sheeting cars, the replacement Cam cleats are the Harken 150SP cam cleats, which have special pins that allow them to open.
Converting Harken Mainsheet Traveler Cars into Windward Sheeting Cars
Using Harken Windward Sheeting Cars in Heavy Wind
Sizes of Harken Windward Sheeting Cars
Midrange CB traveler cars are built to handle high loads on boats from 8 m to 10 m (27 ft to 34 ft). Midrange Windward Sheeting Cars use Harken Midrange CB track.
ig Boat CB traveler cars handle high loads on boats from 9.5 m to 15 m (32 to 50 ft). Harken Windward Sheeting Cars fit Big Boat CB track.
We at Mauri Pro Sailing are fully committed to be your Harken WIndward Sheeting Car specialist not only providing the sailing community with a comprehensive and easy to use web site but with all the appropriate technical information that you might need to select your sailboat hardware and equipment. If you need any assistance selecting the appropriate Windward Sheeting Car for your boat please contact us. Our crew is ready to help! Information courtesy of Harken.