Harken Big Boat 32 mm Traveller Cars handle high loads
on boats from 32 to 50 ft (9.5 m to 15 m) and up to 70 ft (21 m) with coupled
The one-piece solid aluminum construction is lightweight and strong.
Ball bearings run on machined-aluminum, hardcoat-anodized races for smooth
trimming and easing. Stainless steel wire guides keep balls captive when
the car is off the track. Shackle/toggle cars have low pivot points to
handle nonvertical loads.
For a high-performance system, attach Carbo or Black Magic ball
bearing control blocks to stand-up toggle ears, reducing load on the
car so bearings don’t bind. Pair with Carbo block end controls
for reduced friction and a smooth-running system.
ESP systems feature cars with built-in, axle-bearing control blocks.
Pair with axle-bearing ESP end controls for durability and strength.
Torlon ball bearings
Built-in control blocks
1361 - 4082 kg MWL
Tech Tip: Remove the shackle on the block
and insert the block (without
shackle) directly to the stand-up
attachments will not hold the block
rigid for a fair lead, but will flop
around on the deck.
How do I keep fair traveler
leads and still adjust them
from anywhere in the
Swiveling cam cleats can increase
working angles, some to nearly 180
degrees. This is an excellent option
that will allow a fair lead to where
you happen to be. Harken X-Treme
Angle Fairleads, which cleat and
uncleat at up to 90 degrees, can
also help you deal with poor leads.