Sailboat Bowsprits



If you are looking for some real speed going downwind, then you are going to need a good Bowsprit for your Gennaker or asymmetric Spinnaker. We at Mauri Pro Sailing are providing and backing the brands of Sparcraft, Forespar, Forte and Selden on fulfilling your need for speed. These spars are quick to add and remove from the foredeck after installing the deck mounting brackets and when in the inactive position, gives you a clear foredeck when arriving at the docks. Technical assistance is offered by Mauri Pro in helping you make the right choice for right bowsprit for your sailboat.

About Trogear A-Sprit Adjustable Bowsprits

Trogear's A-Sprit Adjustable Bowsprits is made from carbon fiber and currently comes in four models, the AS-30, AS-30R, AS-40 and AS-50. Trogear's bowsprits are designed with elegance and durability. The main focus was to create a light and strong bowsprit that is both attractive and easy to use. The A-Sprit Adjustable Bowsprit is designed to be mounted below the deck line for extra strength and to keep your deck clear of obstructions. Trogear realizes that all boats are and should not be the same, so they have designed the A-Sprit models to also be mounted on the deck should you need to.

The Trogear A-Sprit is an ideal aftermarket bowsprit solution for your sailboat, and facilitates flying Asymmetrical Spinnakers and Code 0s. The A-Sprit is suitable for boats 18-50ft. The AS-30 is for sailboats up to 30 feet, and the AS-40 is for sailboats up to 50ft (max sail size of 2000ft. sq).

About Selden Removable Sailboat Bowsprits

Selden removeable/retractable gennaker bowsprits are sold as a kit for adaption for your yacht. Basically, you fit two pad eyes on deck in line with the bow bracket. The bow bracket is a stainless ring with a polyamide (PA) inner lining through which you slide the bowsprit to active position. When you’re done flying your asymetrical spinnaker, slide the bowsprit back and secure it to the aft pad eye. The inboard end features a spring-loaded plunger for easy attachment to the pad eye. Selden bow sprits can have a tackline that goes through the bowsprit or can have a tack block at the end of the bowsprit. The tackline is preferably pulled through the bowsprit. The line enters a well rounded hole in the outboard end and comes out through the inboard end of the sprit.

An important component of a Selden bowsprit is the bow bracket. Selden bowsprit brackets come in two versions for each size, a bolt on type and a plain ring that can be welded onto an anchor roller bow pulpit. Selden bowsprits are available in bot aluminum and carbon fiber. Carbon fiber bowsprits have the advantage of having significantly more strength for a given weight and diameter over an aluminum bow sprit.

About Forte Carbon Fiber Sailboat Bowsprits

The easy-to-install Forte Carbon Bow Sprit Kit includes everything you need: a beautiful clear painted carbon fiber bowsprit, your choice of easy-to-mount deck hardware and a robust outboard end fitting.

forte bow spritForte offers four bowsprit kit sizes to accommodate a wide variety of sailboat sizes. The carbon fiber bowsprit tube will actually be engineered and built to your specific requirements. Because of this, the OD of the tube is not set in stone; the laminate (wall thickness) may be a little thicker for heavier boats or boats carrying more sail.

When planning to mount your bowsprit kit, we recommend you maintain a 50/50 ratio of unsupported length to supported length. For example if you have 6’ of unsupported pole sticking out past your forward mount, then you will want to have another 6’ of pole to your aft mount. Your total pole length in this case would need to be 12’. 

About Forespar Bowsprits for Multihull Sailboats

The Forespar Multihull bowsprit kit is designed to easily retrofit an existing multihull with no bowsprit to one that has a bowsprit to improve downwind performance using reaching spinnakers and drifter sails. Each sprit is specifically sized to match the boat and can be rigged to use with continuous line furling systems or custom configured. Depending on installation, the sprit pole can also be lifted up out of the way or removed.Increases downwind performance, can be used with a continuous line furling system, professional installation recommended  The bowsprit pole is clear anodized to military standards and made of 6063-T6 marine alloy. 

Adjustable Bowsprits
Multihull Sprit Kits

© Site content copyright Mauri Pro Sailing, LLC. All rights reserved
Site developed by Mauri Pro Sailing
Mauri Logo