|
| Order online |
|
|
| About Facnor Furlers Link Plates |
Assembly with Facnor Thurnbuckle Kit
 Slip the two flexible plastic strips (fig. S) into the slots situated on either side of the drum’s base.
Fix the top of the stainless steel link plates (fig. T), found in the «Facnor turnbuckle kit», to the drum with the screws provided (fig. U). Lightly grease both threads before fixing.
Then, fix the bottom of the plates to the turnbuckle with the pin (fig. V), being careful to correctly position the nylon bushes (fig. W).
BEWARE: THE FITTING PIN (FIG. V) MUST ALWAYS BE FIXED TO THE UPPER SECTION OF THE
JAW.
NEVER FIX THE BOTTOM OF THE PLATES IN THE LOWER SECTION OF THE JAW WITH SUCH AN INSTALLATION THE FORESTAY IS NOT CORRECTLY ARTICULATED.
IMPORTANT : In order to reach the optimum articulation of the forestay fitted with a furling
system, it is absolutely necessary to have a toggle at the top end of the forestay. Furthermore,
concerning the bottom terminal, it is recommended to have also a toggle.
|
Top |
|
 |
|
Facnor Link PLates |
We at Mauri Pro Sailing are fully committed to be your Facnor sailboat hardware and equipment specialist not only providing the sailing community with a comprehensive and easy to use web site but with all the appropriate technical information that you might need to select your sailboat hardware and sailing gear.
Pictures and text courtesy of Facnor |
|
