Facnor Code Zeros and Gennakers are finished with luff ropes that provide the sail with strength to handle the high halyard load required for proper function. Facnor furlers are designed with this important feature in mind and we manufacture thimbles that fit the jaw of the furler to accommodate different luff ropes. The FX code zero and gennaker furlers are designed with an open jaw to transmit the twist of the luff rope.

Read about:
Gennaker Furlers | Gennaker Standard Furler | Headsail Furlers | Racing Furler | Jib Furler | Wire Furlers

Order online Gennaker FX Furlers | All Facnor Furling System

Facnor Aluminum Thimbles

Luff ropes finished with Facnor lightweight aluminum thimbles fit the exact inside dimension of the jaw on the furler for a clean finish at the tack and head. The thimble and luff rope quickly transfer the furling action from the drum to the luff for tight and even furling. Facnor thimbles are CNC machined from a solid block of aluminum so they resist crushing under high loads. Consult with your sailmaker to find the best luff rope configuration for your boat. However, you can be sure that Facnor makes thimbles that will suit your needs.

Order online

Facnor Blocks and Sheaves

Often high halyard loads are required to properly sail with Code Zeros so Facnor offer many variations of 2 to 1 fittings. Compact sheaves integrated into the halyard swivel reduce weight aloft and increase luff length while a block installed on the bottom of the drum can reduce the amount of mast compression. Many options are available to accommodate any specific need.

Order online